Evaluation of photo-induced cellular damage using photoautotrophic cultures of puk-bung hairy roots as a sensing tool

In photoautotrophic cultures of pak-bung hairy roots, strong light irradiation (22 W/m²) increased the content of reactive oxygen species (ROS) in the cells, resulting in chlorophyll (Chl) degradation and DNA injury. The Chl degradation rate, R_D, can be used as a parameter to measure the cellular damage caused by photo-induced stress. The presence of the antioxidants ascorbic acid, chlorogenic acid or catechin reduced the R_D, while lowering the content of ROS and moderating the DNA injury.     

Evaluation of Chinese hamster ovary cell stability during repeated batch culture for large-scale antibody production

Pharmaceutical manufacturing plants can be operated continuously for several months. It is therefore important to use cells with long-term stability for the production of active ingredients. We investigated the reliability and long-term stability of an antibody-producing cell line. A recombinant Chinese hamster ovary (CHO) cell line was cultivated in spinner flasks and reactors, including a practical production-scale reactor (1600 L), for 109 days to produce monoclonal antibodies against the HM1.24 antigen. During cultivation, the cells remained stable and there was an increase in the rate of cell proliferation, yielding viable cells at high density. A decrease in cell-specific productivity was associated with this increase in the rate of cell proliferation. The cells were genetically stable and other measures of cellular function remained consistent throughout the cultivation period.     

Characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol

In this study, we report the characterization of carbonaceous films deposited on metal substrates by liquid-phase electrodeposition in methanol. The characterization of carbonaceous films by electrodeposition was examined by means of Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), electron energy loss spectroscopy (EELS), secondary ion mass spectrometry (SIMS), atom probe (AP) and high resolution-elastic recoil detection analysis (HR-ERDA). From these results, it was found that the films deposited on the metal substrates were composed of the sp² and sp³ carbon contents, of which the ratio was about 7:3. Furthermore, the films by electrodeposition contained much hydrogen. The hydrogen contents in the surface were about 60 at.% and those in the subsurface were a few 10 at.%.     

FIDAS: Detailed subchannel analysis code based on the three-fluid and three-field model

The Film Dryout Analysis Code in Subchannels, FIDAS, has been developed with the main objective of predicting dryout and post-dryout heat transfer in a channel and in rod bundles. In FIDAS, two-phase flow consisting of continuous liquid film, continuous vapor and entrained droplets is modeled by a three-fluid, three-field representation of 12 field equations, i.e. three continuity, three energy and six momentum equations. FIDAS can predict dryout without any empirical CHF correlations by introducing annular flow modeling and the ‘film dryout criterion’. Experiments on film flow characteristics, subchannel flow and enthalpy distributions, dryout and post-dryout heat transfer in tubes and rod bundles were analyzed to demonstrate the performance of FIDAS. The predictions of FIDAS are in close agreement with the experiments.     

Sol-gel synthesis of high-humidity-sensitive amorphous P2O5-TiO2 films

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Learning of real robot's inverse dynamics by a forward‐propagation learning rule

A forward‐propagation learning rule (FPL) has been proposed for a neural network (NN) to learn an inverse model of a controlled object. A feature of FPL is that the trajectory error propagates forward in NN and appropriate values of two learning parameters are required to be set. FPL has only been simulated to several kinds of controlled objects such as a two‐link arm in a horizontal plane. In this work, we applied FPL to AIBO and showed the validity of FPL on a real controlled object. At first, we tested a learning experiment of an inverse dynamic of a two‐link arm in a sagittal plane with viscosity and Coulomb friction by computer simulation. In this simulation, a low‐pass filter (LPF) was applied to realized trajectories because coulomb friction vibrates them. From the simulation results, we found that the learning process is stable by some adequate sets of the learning parameters although it is more sensitive to the values of the parameters owing to friction and gravity terms. Finally, we tested applying FPL to motor control of AIBO's leg. The inverse dynamics model was acquired by FPL with only about 150 learning iterations. From these results, the validity of the FPL was confirmed by the real robot control experiments. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 161(4): 38–48, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20456     

A photoimmobilizable sulfobetaine-based polymer for a nonbiofouling surface

A novel photoreactive polymer containing sulfobetaine polar groups was prepared by copolymerization of two kinds of methacrylic acids with sulfobetaine and azidoaniline. The polymer was photoimmobilized on polyester and polystyrene surfaces. Its effects on surface modification were investigated from its interactions with water, proteins and cells. Polymer immobilization altered both of the plain surfaces to becoming hydrophilic in a similar range of static contact angles (12.5 ± 1.6° on polyester and 14.7 ± 2.2° on polystyrene). This suggests that the surfaces were covered with sulfobetaine polar groups. Micropattern immobilization was carried out on both polymers using a photomask. The formed pattern was identical to the photomask, showing that the polymer was formed in response to ultraviolet irradiation. Measurements using atomic force microscopy showed that the polymer was formed at a thickness of 550 nm, demonstrating that the polymer was cross-linked with itself and with the substrate molecules. Measurements using time-of-flight secondary ion mass spectrometry detected an abundance of sulfur-containing ions in the patterned polymer, confirming that sulfobetaine had been immobilized. Protein adsorption and mammalian cell adhesiveness were reduced markedly on the immobilized regions. The reduction of cell adhesiveness was concentration-dependent for the immobilized polymer on polyester surfaces. In conclusion, a novel sulfobetaine-containing polymer was immobilized photoreactively on conventional polymer surfaces and significantly reduced interactions with proteins and mammalian cells.     

Molecular dynamics simulation of dislocation nucleation and motion at γ/γ′ interface in Ni-based superalloy

Molecular dynamics simulations are conducted on the dislocation behavior at the apices and edges of cuboidal Ni₃Al precipitate in a pure Ni matrix, or the idealized γ/γ′ microstructure in a Ni-based superalloy. A tensile simulation of the [001] direction is implemented with a periodic cell that has eight cubic precipitates in order to investigate the nucleation site of dislocation in the idealized microstructure with no defects other than the γ/γ′ interfaces. The effect of residual internal stresses on the stability of the interfaces is also discussed. Other simulations are conducted on the behavior of edge dislocations nucleated from a free surface and proceeding in the γ matrix toward γ′ precipitates under shear force. Dislocation pinning at γ′ precipitates, bowing-out in the γ channel, pile-up and nucleation of superdislocation in the γ′ precipitate are simulated and inspected in detail. Discussions on the size of the γ/γ′ microstructure and the sharpness of the edge of the γ′ precipitate are also presented.